The Armacost Lighting 60 Watt; 12 Volt Universal Dimming LED Power Supply delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The LED lighting driver is designed using high-performance, professional grade electronics that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. The power supply is rated up to 60-watts at 12-volts. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. Includes: 1) 60W, 12V Power Supply, 1) Detachable AC Power Cord
Features
- For direct wire installations. Remove end caps to access on-board terminal block connectors; use NM 14AWG 2C cable (Romex® style) to tie in with 120-volt AC line voltage
- Uses soft start on and fade off technology
- Works with Armacost low-voltage dimmers and RGB color controllers
- No minimum power load; dimming works equally well whether powering a single 5 watt LED puck light or 60 watts of tape lighting – or a combination of both
- Class 2 power supply is intrinsically safe
- NEC Class II AC input requires no ground wire connection
- Rated for 30,000 hours when used 8–12 hours a day at full load; expect longer life when dimmed or when using lesser wattage loads
- Safety features include automatic shut-off in case of lighting overload, open circuit, short circuit, over temperature or other fault
- Although virtually all dimmers will work with Armacost Dimmable LED Drivers, we recommend dimmers that can be programmed or have an adjustment dial to set the low-end dimming range, such as Lutron® C•L and Leviton IllumaTech® Universal Dimmers
Dimensions
- Product Depth (in.): 7.4
- Product Height (in.): 1.4
- Product Width (in.): 2.4